Philadelphia area contrete pumping
OUR FLEET
B. Pietrini & Sons has a variety of options in our fleet to match the needs of your project. Click below on any of the selection for more information and technical specifications. If you need further assistance please contact us and we will be more than happy to assist you and help you find the equipment you are looking for.

BPA 750-18
Open loop, all-hydraulic concrete pump for fuel efficiency, twin circuit hydraulics, standard dual shifting cylinders, standard hopper agitator and the Long Rock Valve™ handles harsh mixes, shotcrete and grout.


Technical Data
Concrete Output Per Hour (C.Y./Hr.)*70 cu yds
Max. Pressure on Concrete (PSI)859 psi
Max Horixontal Pumping Distance (ft.)*940 ft.
Max Vertical Pumping Distance (ft.)*255 ft.
Max. Aggregate Size (in.)**1 1/2 in.
Min. Concrete Slump (in.)**0 in.
Pumping Cylinder Diameter (in.)7 in
Pumping Cylinder Length (in.)39 in
Max. Pump Strokes Per Minute34
Rock Valve Inlet Diameter (in.)6 in.
Rock Valve Outlet Diameter (in.)5 in.
Charging Hopper-Height (in.)51 in.
Charging Hopper-Capacity (Cu. Ft.)51 in.
Diesel Powered (HP)68 HP
Electric Powered (HP)60 HP
Trailer Units Weight (lbs.)5600

*Pumping distances shown are to be used as a guide only since they have been considerably exceeded on specific projects. Maximum attainable distances depend upon concrete mix design and pipeline diameter. Maximum output and distance cannot be achieved simutaineously.

**Mimimum slump and maximum aggregate size are dependent upon concrete mix design and pipeline diameter. Pump specifications are for standard units. Other units are available.

Specifications are subject to change without prior notice.


PDF Spec Sheet
Click here to download a PDF spec sheet. For more information please give us a call at 610.265.2110





©2013 • B Pietrini & Sons • 111 East Church Road • King of Prussia, PA 19406 • P: 610.265.2110
Site Design: JDM Creative Advertising